Submersible Grinder

BGPH-DS / 3, 5 & 7.5 HP

Discharge: 2½" flange, horizontal.

HP: 3, 5 & 7.5

RPM: 3500

Impeller: 10 vanes, vortex with vanes on back side, dynamically balanced. Cast iron ASTM A-48, class 30.

Radial cutter and shredding ring: hardened 440C, stainless steel, hardness Rockwell C-55.

Shaft: 420 series stainless steel.

Motor: Single-phase: NEMA L, permanent split capacitor (to be located in control panel), 230 volts, 60 Hz, oil filled. Class F insulation.

Three-phase: NEMA B, 230/460 volts, 60 Hz, oil filled. Class F insulation.

Requires overload protection to be included in control panel.

You might also be interested in:

Stainless steel base plate with hardware to mount a 3, 5 or 7.5 HP grinder pump.

The design of the base allows the submersible grinder pump to be installed in a wet well at the required clearance above the basin floor with rigid piping or flex hose configurations.